Paint Protection Film

Clear Matte PPF

Matte, without the repaint. Turns gloss factory paint into a flat, low-sheen finish, and protects it at the same time. Reversible in a way a respray never is.

Clear Matte PPF · 7 Year

Penguin

Flat, cold and precise. Turns gloss paint matte without touching the paint.

Penguin — specification
ItemSpecification
Base material Covestro PCU
PCU type A Grade
Gloss ≥ 60 GU
Product thickness 190 ± 10 µm
Coating thickness 20 ± 5 µm
Adhesive thickness 25 ± 5 µm
Tensile strength > 400
Peel strength ≥ 75 N/cm
Elongation at break ≥ 400%
Maximum temperature 120 °C
Yellowness index < 2
Anti-acid resistance Oxalate — 72 h, pass
Self-healing Heat activation at 75 °C
Adhesive Ashland adhesive

Figures are this film's own, from its technical data sheet.

Clear Matte PPF · 10 Year

Polar Bear

The long winter. Ten years of matte finish that doesn't gloss up at the edges.

Polar Bear — specification
ItemSpecification
Base material Covestro PCU
PCU type A Grade
Gloss ≥ 60 GU
Product thickness 210 ± 10 µm
Coating thickness 25 ± 5 µm
Adhesive thickness 30 ± 5 µm
Tensile strength > 350
Peel strength ≥ 75 N/cm
Elongation at break ≥ 400%
Maximum temperature 120 °C
Yellowness index < 2
Anti-acid resistance Oxalate — 72 h, pass
Self-healing Heat activation at 75 °C
Adhesive Ashland adhesive

Figures are this film's own, from its technical data sheet.

Protection

What it stops

Stone chips

Road debris at speed, absorbed by the film instead of transmitted to the paint.

Swirl marks and light abrasion

Wash marks displace the elastic top coat rather than removing it.

UV fade

Ultraviolet reaches the film, not the clear coat underneath it.

Bird droppings and tree sap

Acidic deposits sit on a resistant surface and lift off in a wash.

Road salt and chemicals

Unchanged after 72 hours of oxalate exposure under lab test.

Insect etching

The residue that etches a bonnet over a summer never reaches it.

Coverage

How much of the car

Your installer will quote against one of these. Whichever you choose is recorded on the certificate, so what was fitted is never a matter of memory.

Panels shown are indicative. Exact coverage is agreed with your installer and recorded on the certificate.

Care

Looking after it

Wait seven days after installation before washing. Hand wash with a pH-neutral shampoo and a clean microfibre. Avoid high-pressure jets at the film edges. Do not use abrasive polishes, solvent-based degreasers or dyed waxes. Light scratches will disappear with warm water or sunlight; deeper marks can be heat-treated by your installer.

Unopened rolls keep for one year, stored upright at +15 °C to +25 °C and around 50% relative humidity.

Warranty

7 to 10 years

Every installation is registered the day it is fitted, against the roll it was cut from. The certificate carries your warranty number, a batch reference and a QR code that resolves to a live record.

What the certificate covers

Covered: abnormal yellowing, cracking, blistering, delamination, adhesive failure and loss of self-healing function. Full terms, including the coverage period for each item, are published on the warranty terms page.

Fit Clear Matte PPF

Goldman is fitted by trained installers. Tell us where you are and we will point you at the nearest one.

Find an installer Request a quote